फाइल और प्रिंट सर्वर
यह अध्याय आपको सांबा, सर्वर मैसेज ब्लॉक (SMB) और कॉमन इंटरनेट फाइल सिस्टम (CIFS
) प्रोटोकॉल का एक ओपन सोर्स कार्यान्वयन, और vsftpd, Fedora के साथ भेजा गया प्राथमिक FTP सर्वर की स्थापना और विन्यास के बारे में मार्गदर्शन करता है। इसके अतिरिक्त, यह बताता है कि प्रिंटर को विन्यस्त करने के लिए प्रिंटर टूल का उपयोग कैसे करें।
Samba
Samba is the standard open source Windows interoperability suite of programs for Linux. It implements the server message block (SMB
) protocol. Modern versions of this protocol are also known as the common Internet file system (CIFS
) protocol. It allows the networking of Microsoft Windows, Linux, UNIX, and other operating systems together, enabling access to Windows-based file and printer shares. Samba’s use of SMB
allows it to appear as a Windows server to Windows clients.
Installing the samba package
In order to use Samba, first ensure the samba package is installed on your system by running, as ~]# dnf install samba For more information on installing packages with DNF, see Installing Packages. |
Introduction to Samba
Samba is an important component to seamlessly integrate Linux Servers and Desktops into Active Directory (AD) environments. It can function both as a domain controller (NT4-style) or as a regular domain member (AD or NT4-style). .What Samba can do:
-
Serve directory trees and printers to Linux, UNIX, and Windows clients
-
Assist in network browsing (with NetBIOS)
-
Authenticate Windows domain logins
-
Provide Windows Internet Name Service (
WINS
) name server resolution -
Act as a Windows NT-style Primary Domain Controller (PDC)
-
Act as a Backup Domain Controller (BDC) for a Samba-based PDC
-
Act as an Active Directory domain member server
-
Join a Windows NT/2000/2003/2008 PDC/Windows Server 2012
-
Act as a BDC for a Windows PDC (and vice versa)
-
Act as an Active Directory domain controller
Samba Daemons and Related Services
Samba is comprised of three daemons (smbd
, nmbd
, and winbindd
). Three services (smb
, nmb
, and winbind
) control how the daemons are started, stopped, and other service-related features. These services act as different init scripts. Each daemon is listed in detail below, as well as which specific service has control over it.
The smbd
server daemon provides file sharing and printing services to Windows clients. In addition, it is responsible for user authentication, resource locking, and data sharing through the SMB
protocol. The default ports on which the server listens for SMB
traffic are TCP
ports 139 and 445.
The smbd
daemon is controlled by the smb
service.
The nmbd
server daemon understands and replies to NetBIOS name service requests such as those produced by SMB/CIFS in Windows-based systems. These systems include Windows 95/98/ME, Windows NT, Windows 2000, Windows XP, and LanManager clients. It also participates in the browsing protocols that make up the Windows Network Neighborhood
view. The default port that the server listens to for NMB
traffic is UDP
port 137
.
The nmbd
daemon is controlled by the nmb
service.
The winbind
service resolves user and group information received from a server running Windows NT, 2000, 2003, Windows Server 2008, or Windows Server 2012. This makes Windows user and group information understandable by UNIX platforms. This is achieved by using Microsoft RPC calls, Pluggable Authentication Modules (PAM), and the Name Service Switch (NSS). This allows Windows NT domain and Active Directory users to appear and operate as UNIX users on a UNIX machine. Though bundled with the Samba distribution, the winbind
service is controlled separately from the smb
service.
The winbind
daemon is controlled by the winbind
service and does not require the smb
service to be started in order to operate. winbind
is also used when Samba is an Active Directory member, and may also be used on a Samba domain controller (to implement nested groups and interdomain trust). Because winbind
is a client-side service used to connect to Windows NT-based servers, further discussion of winbind
is beyond the scope of this chapter.
Obtaining a list of utilities that are shipped with Samba
See Samba Distribution Programs for a list of utilities included in the Samba distribution. |
Connecting to a Samba Share
You can use either Nautilus or command line to connect to available Samba shares.
Mounting the Share
Sometimes it is useful to mount a Samba share to a directory so that the files in the directory can be treated as if they are part of the local file system.
To mount a Samba share to a directory, create a directory to mount it to (if it does not already exist), and execute the following command as root
:
mount -t cifs //servername/sharename /mnt/point/ -o username=username,password=password
This command mounts sharename from servername in the local directory /mnt/point/.
For more information about mounting a samba share, see the mount.cifs(8) manual page.
Installing cifs-utils package
The mount.cifs utility is a separate RPM (independent from Samba). In order to use mount.cifs, first ensure the cifs-utils package is installed on your system by running, as ~]# dnf install cifs-utils For more information on installing packages with DNF, see Installing Packages. Note that the cifs-utils package also contains the cifs.upcall binary called by the kernel in order to perform kerberized CIFS mounts. For more information on cifs.upcall, see the cifs.upcall(8) manual page. |
CIFS servers that require plain text passwords
Some CIFS servers require plain text passwords for authentication. Support for plain text password authentication can be enabled using the following command as ~]# echo 0x37 > /proc/fs/cifs/SecurityFlags
|
Configuring a Samba Server
The default configuration file (/etc/samba/smb.conf
) allows users to view their home directories as a Samba share. It also shares all printers configured for the system as Samba shared printers. You can attach a printer to the system and print to it from the Windows machines on your network.
Graphical Configuration
To configure Samba using a graphical interface, use one of the available Samba graphical user interfaces. A list of available GUIs can be found at https://www.samba.org/samba/GUI/.
Command-Line Configuration
Samba uses /etc/samba/smb.conf
as its configuration file. If you change this configuration file, the changes do not take effect until you restart the Samba daemon with the following command, as root
:
~]# systemctl restart smb.service
To specify the Windows workgroup and a brief description of the Samba server, edit the following lines in your /etc/samba/smb.conf
file:
workgroup = WORKGROUPNAME server string = BRIEF COMMENT ABOUT SERVER
Replace WORKGROUPNAME with the name of the Windows workgroup to which this machine should belong. The BRIEF COMMENT ABOUT SERVER is optional and is used as the Windows comment about the Samba system.
To create a Samba share directory on your Linux system, add the following section to your /etc/samba/smb.conf
file (after modifying it to reflect your needs and your system):
[sharename] comment = Insert a comment here path = /home/share/ valid users = tfox carole writable = yes create mask = 0765
The above example allows the users tfox and carole to read and write to the directory /home/share/
, on the Samba server, from a Samba client.
Starting and Stopping Samba
To start a Samba server, type the following command in a shell prompt, as root
:
~]# systemctl start smb.service
Setting up a domain member server
To set up a domain member server, you must first join the domain or Active Directory using the net join command before starting the |
To stop the server, type the following command in a shell prompt, as root
:
~]# systemctl stop smb.service
The restart
option is a quick way of stopping and then starting Samba. This is the most reliable way to make configuration changes take effect after editing the configuration file for Samba. Note that the restart option starts the daemon even if it was not running originally.
To restart the server, type the following command in a shell prompt, as root
:
~]# systemctl restart smb.service
The condrestart
(conditional restart) option only starts smb
on the condition that it is currently running. This option is useful for scripts, because it does not start the daemon if it is not running.
Applying the changes to the configuration
When the |
To conditionally restart the server, type the following command, as root
:
~]# systemctl try-restart smb.service
A manual reload of the /etc/samba/smb.conf
file can be useful in case of a failed automatic reload by the smb
service. To ensure that the Samba server configuration file is reloaded without restarting the service, type the following command, as root
:
~]# systemctl reload smb.service
By default, the smb
service does not start automatically at boot time. To configure Samba to start at boot time, type the following at a shell prompt as root
:
~]# systemctl enable smb.service
See Services and Daemons for more information regarding this tool.
Samba Server Types and the smb.conf
File
Samba configuration is straightforward. All modifications to Samba are done in the /etc/samba/smb.conf
configuration file. Although the default smb.conf
file is well documented, it does not address complex topics such as LDAP, Active Directory, and the numerous domain controller implementations.
The following sections describe the different ways a Samba server can be configured. Keep in mind your needs and the changes required to the /etc/samba/smb.conf
file for a successful configuration.
Stand-alone Server
A stand-alone server can be a workgroup server or a member of a workgroup environment. A stand-alone server is not a domain controller and does not participate in a domain in any way. The following examples include several user-level security configurations. For more information on security modes, see Samba Security Modes.
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement anonymous read-only file sharing. Two directives are used to configure anonymous access – map to guest = Bad user
and guest account = nobody
.
[global] workgroup = DOCS netbios name = DOCS_SRV security = user guest account = nobody # default value map to guest = Bad user [data] comment = Documentation Samba Server path = /export read only = yes guest ok = yes
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement anonymous read/write file sharing. To enable anonymous read/write file sharing, set the read only
directive to no
. The force user
and force group
directives are also added to enforce the ownership of any newly placed files specified in the share.
Do not use anonymous read/write servers
Although having an anonymous read/write server is possible, it is not recommended. Any files placed in the share space, regardless of user, are assigned the user/group combination as specified by a generic user ( |
[global] workgroup = DOCS security = user guest account = nobody # default value map to guest = Bad user [data] comment = Data path = /export guest ok = yes writeable = yes force user = user force group = group
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement an anonymous print server. Setting browseable
to no
as shown does not list the printer in Windows Network Neighborhood
. Although hidden from browsing, configuring the printer explicitly is possible. By connecting to DOCS_SRV
using NetBIOS, the client can have access to the printer if the client is also part of the DOCS
workgroup. It is also assumed that the client has the correct local printer driver installed, as the use client driver
directive is set to yes
. In this case, the Samba server has no responsibility for sharing printer drivers to the client.
[global] workgroup = DOCS netbios name = DOCS_SRV security = user map to guest = Bad user printing = cups [printers] comment = All Printers path = /var/spool/samba guest ok = yes printable = yes use client driver = yes browseable = yes
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement a secure read/write file and print server. Setting the security
directive to user
forces Samba to authenticate client connections. Notice the [homes]
share does not have a force user
or force group
directive as the [public]
share does. The [homes]
share uses the authenticated user details for any files created as opposed to the force user
and force group
in [public]
.
[global] workgroup = DOCS netbios name = DOCS_SRV security = user printcap name = cups disable spools = yes show add printer wizard = no printing = cups [homes] comment = Home Directories valid users = %S read only = no browseable = no [public] comment = Data path = /export force user = docsbot force group = users guest ok = yes [printers] comment = All Printers path = /var/spool/samba printer admin = john, ed, @admins create mask = 0600 guest ok = yes printable = yes use client driver = yes browseable = yes
Domain Member Server
A domain member, while similar to a stand-alone server, is logged into a domain controller (either Windows or Samba) and is subject to the domain’s security rules. An example of a domain member server would be a departmental server running Samba that has a machine account on the Primary Domain Controller (PDC). All of the department’s clients still authenticate with the PDC, and desktop profiles and all network policy files are included. The difference is that the departmental server has the ability to control printer and network shares.
To implement an Active Directory domain member server, follow procedure below:
-
Create the
/etc/samba/smb.conf
configuration file on a member server to be added to the Active Directory domain. Add the following lines to the configuration file:[global] realm = EXAMPLE.COM security = ADS encrypt passwords = yes # Optional. Use only if Samba cannot determine the Kerberos server automatically. password server = kerberos.example.com
With the above configuration, Samba authenticates users for services being run locally but is also a client of the Active Directory. Ensure that your kerberos
realm
parameter is shown in all caps (for examplerealm = EXAMPLE.COM
). Since Windows 2000/2003/2008 requires Kerberos for Active Directory authentication, therealm
directive is required. If Active Directory and Kerberos are running on different servers, thepassword server
directive is required to help the distinction. -
Configure Kerberos on the member server. Create the
/etc/krb5.conf
configuration file with the following content:[logging] default = FILE:/var/log/krb5libs.log [libdefaults] default_realm = AD.EXAMPLE.COM dns_lookup_realm = true dns_lookup_kdc = true ticket_lifetime = 24h renew_lifetime = 7d rdns = false forwardable = false [realms] # Define only if DNS lookups are not working # AD.EXAMPLE.COM = { # kdc = server.ad.example.com # admin_server = server.ad.example.com # master_kdc = server.ad.example.com # } [domain_realm] # Define only if DNS lookups are not working # .ad.example.com = AD.EXAMPLE.COM # ad.example.com = AD.EXAMPLE.COM
Uncomment the
[realms]
and[domain_realm]
sections if DNS lookups are not working.For more information on Kerberos, and the /etc/krb5.conf file, see the Using Kerberos section of the Red Hat Enterprise Linux 7 System Level Authentication Guide.
-
To join an Active Directory server, type the following command as
root
on the member server:~]# net ads join -U administrator%password
The net command authenticates as
Administrator
using the NT LAN Manager (NTLM) protocol and creates the machine account. Then net uses the machine account credentials to authenticate with Kerberos.The security optionSince
security = ads
and notsecurity = user
is used, a local password back end such assmbpasswd
is not needed. Older clients that do not supportsecurity = ads
are authenticated as ifsecurity = domain
had been set. This change does not affect functionality and allows local users not previously in the domain.
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement a Windows NT4-based domain member server. Becoming a member server of an NT4-based domain is similar to connecting to an Active Directory. The main difference is NT4-based domains do not use Kerberos in their authentication method, making the /etc/samba/smb.conf
file simpler. In this instance, the Samba member server functions as a pass through to the NT4-based domain server.
[global] workgroup = DOCS netbios name = DOCS_SRV security = domain [homes] comment = Home Directories valid users = %S read only = no browseable = no [public] comment = Data path = /export force user = docsbot force group = users guest ok = yes
Having Samba as a domain member server can be useful in many situations. There are times where the Samba server can have other uses besides file and printer sharing. It may be beneficial to make Samba a domain member server in instances where Linux-only applications are required for use in the domain environment. Administrators appreciate keeping track of all machines in the domain, even if not Windows-based. In the event the Windows-based server hardware is deprecated, it is quite easy to modify the /etc/samba/smb.conf
file to convert the server to a Samba-based PDC. If Windows NT-based servers are upgraded to Windows 2000/2003/2008 the /etc/samba/smb.conf
file is easily modifiable to incorporate the infrastructure change to Active Directory if needed.
Make sure you join the domain before starting Samba
After configuring the ~]# net rpc join -U administrator%password |
Note that the -S
option, which specifies the domain server host name, does not need to be stated in the net rpc join command. Samba uses the host name specified by the workgroup
directive in the /etc/samba/smb.conf
file instead of it being stated explicitly.
Domain Controller
A domain controller in Windows NT is functionally similar to a Network Information Service (NIS) server in a Linux environment. Domain controllers and NIS servers both host user and group information databases as well as related services. Domain controllers are mainly used for security, including the authentication of users accessing domain resources. The service that maintains the user and group database integrity is called the Security Account Manager (SAM). The SAM database is stored differently between Windows and Linux Samba-based systems, therefore SAM replication cannot be achieved and platforms cannot be mixed in a PDC/BDC environment.
In a Samba environment, there can be only one PDC and zero or more BDCs.
A mixed Samba/Windows domain controller environment
Samba cannot exist in a mixed Samba/Windows domain controller environment (Samba cannot be a BDC of a Windows PDC or vice versa). Alternatively, Samba PDCs and BDCs can coexist. |
tdbsam
The simplest and most common implementation of a Samba PDC uses the new default tdbsam
password database back end. Replacing the aging smbpasswd
back end, tdbsam
has numerous improvements that are explained in more detail in Samba Account Information Databases. The passdb backend
directive controls which back end is to be used for the PDC.
The following /etc/samba/smb.conf
file shows a sample configuration needed to implement a tdbsam
password database back end.
tdbsam
[global] workgroup = DOCS netbios name = DOCS_SRV passdb backend = tdbsam security = user add user script = /usr/sbin/useradd -m "%u" delete user script = /usr/sbin/userdel -r "%u" add group script = /usr/sbin/groupadd "%g" delete group script = /usr/sbin/groupdel "%g" add user to group script = /usr/sbin/usermod -G "%g" "%u" add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null -g machines "%u" # The following specifies the default logon script # Per user logon scripts can be specified in the user # account using pdbedit logon script = logon.bat # This sets the default profile path. # Set per user paths with pdbedit logon drive = H: domain logons = yes os level = 35 preferred master = yes domain master = yes [homes] comment = Home Directories valid users = %S read only = no [netlogon] comment = Network Logon Service path = /var/lib/samba/netlogon/scripts browseable = no read only = no # For profiles to work, create a user directory under the # path shown. # mkdir -p /var/lib/samba/profiles/john [Profiles] comment = Roaming Profile Share path = /var/lib/samba/profiles read only = no browseable = no guest ok = yes profile acls = yes # Other resource shares ... ...
To provide a functional PDC system which uses tdbsam
follow these steps:
-
Adjust the
smb.conf
configuration file as shown in An Example Configuration of Primary Domain Controller (PDC) Usingtdbsam
. -
Add the
root
user to the Samba password database. You will be prompted to provide a new Samba password for theroot
user:~]# smbpasswd -a root New SMB password:
-
Start the
smb
service:~]# service smb start
-
Make sure all profile, user, and netlogon directories are created.
-
Add groups that users can be members of:
~]# groupadd -f users ~]# groupadd -f nobody ~]# groupadd -f ntadmins
-
Associate the UNIX groups with their respective Windows groups.
~]# net groupmap add ntgroup="Domain Users" unixgroup=users ~]# net groupmap add ntgroup="Domain Guests" unixgroup=nobody ~]# net groupmap add ntgroup="Domain Admins" unixgroup=ntadmins
-
Grant access rights to a user or a group. For example, to grant the right to add client machines to the domain on a Samba domain controller, to the members to the Domain Admins group, execute the following command:
~]# net rpc rights grant 'DOCS\Domain Admins' SetMachineAccountPrivilege -S PDC -U root
Keep in mind that Windows systems prefer to have a primary group which is mapped to a domain group such as Domain Users.
Windows groups and users use the same namespace thus not allowing the existence of a group and a user with the same name like in UNIX.
Limitations of the tdbsam authentication back end
If you need more than one domain controller or have more than 250 users, do not use the |
Although it is possible for Samba to be a member of an Active Directory, it is not possible for Samba to operate as an Active Directory domain controller.
Samba Security Modes
There are only two types of security modes for Samba, share-level and user-level, which are collectively known as security levels. Share-level security is deprecated and has been removed from Samba. Configurations containing this mode need to be migrated to use user-level security. User-level security can be implemented in one of three different ways. The different ways of implementing a security level are called security modes.
User-Level Security
User-level security is the default and recommended setting for Samba. Even if the security = user
directive is not listed in the /etc/samba/smb.conf
file, it is used by Samba. If the server accepts the client’s user name and password, the client can then mount multiple shares without specifying a password for each instance. Samba can also accept session-based user name and password requests. The client maintains multiple authentication contexts by using a unique UID for each logon.
In the /etc/samba/smb.conf
file, the security = user
directive that sets user-level security is:
[GLOBAL] ... security = user ...
As mentioned above, share-level security mode is deprecated. To configure a Samba guest share without using the security = share
parameter, follow the procedure below:
The following sections describe other implementations of user-level security.
In domain security mode, the Samba server has a machine account (domain security trust account) and causes all authentication requests to be passed through to the domain controllers. The Samba server is made into a domain member server by using the following directives in the /etc/samba/smb.conf
file:
[GLOBAL] ... security = domain workgroup = MARKETING ...
If you have an Active Directory environment, it is possible to join the domain as a native Active Directory member. Even if a security policy restricts the use of NT-compatible authentication protocols, the Samba server can join an ADS using Kerberos. Samba in Active Directory member mode can accept Kerberos tickets.
In the /etc/samba/smb.conf
file, the following directives make Samba an Active Directory member server:
[GLOBAL] ... security = ADS realm = EXAMPLE.COM password server = kerberos.example.com ...
Share-Level Security
With share-level security, the server accepts only a password without an explicit user name from the client. The server expects a password for each share, independent of the user name. There have been recent reports that Microsoft Windows clients have compatibility issues with share-level security servers. This mode is deprecated and has been removed from Samba. Configurations containing security = share
should be updated to use user-level security. Follow the steps in Configuring Samba Guest Shares to avoid using the security = share
directive.
Samba Account Information Databases
The following is a list different back ends you can use with Samba. Other back ends not listed here may also be available.
- Plain Text
-
Plain text back ends are nothing more than the
/etc/passwd
type back ends. With a plain text back end, all user names and passwords are sent unencrypted between the client and the Samba server. This method is very insecure and is not recommended for use by any means. It is possible that different Windows clients connecting to the Samba server with plain text passwords cannot support such an authentication method. smbpasswd
-
The
smbpasswd
back end utilizes a plain ASCII text layout that includes the MS Windows LanMan and NT account, and encrypted password information. Thesmbpasswd
back end lacks the storage of the Windows NT/2000/2003 SAM extended controls. Thesmbpasswd
back end is not recommended because it does not scale well or hold any Windows information, such as RIDs for NT-based groups. Thetdbsam
back end solves these issues for use in a smaller database (250 users), but is still not an enterprise-class solution. ldapsam_compat
-
The
ldapsam_compat
back end allows continued OpenLDAP support for use with upgraded versions of Samba. tdbsam
-
The default
tdbsam
password back end provides a database back end for local servers, servers that do not need built-in database replication, and servers that do not require the scalability or complexity of LDAP. Thetdbsam
back end includes all of thesmbpasswd
database information as well as the previously-excluded SAM information. The inclusion of the extended SAM data allows Samba to implement the same account and system access controls as seen with Windows NT/2000/2003/2008-based systems.The
tdbsam
back end is recommended for 250 users at most. Larger organizations should require Active Directory or LDAP integration due to scalability and possible network infrastructure concerns. ldapsam
-
The
ldapsam
back end provides an optimal distributed account installation method for Samba. LDAP is optimal because of its ability to replicate its database to any number of servers such as the Red Hat Directory Server or an OpenLDAP Server. LDAP databases are light-weight and scalable, and as such are preferred by large enterprises. Installation and configuration of directory servers is beyond the scope of this chapter. For more information on the Red Hat Directory Server, see the Red Hat Directory Server 10 Deployment Guide. For more information on LDAP, see OpenLDAP.If you are upgrading from a previous version of Samba to 3.0, note that the OpenLDAP schema file (
/usr/share/doc/samba-version/LDAP/samba.schema
) and the Red Hat Directory Server schema file (/usr/share/doc/samba-version/LDAP/samba-schema-FDS.ldif
) have changed. These files contain the attribute syntax definitions and objectclass definitions that theldapsam
back end needs in order to function properly.As such, if you are using the
ldapsam
back end for your Samba server, you will need to configureslapd
to include one of these schema file. See Extending Schema for directions on how to do this.Make sure the openldap-servers package is installedYou need to have the openldap-servers package installed if you want to use the
ldapsam
back end. To ensure that the package is installed, execute the following command asroots
:~]# dnf install openldap-servers
Samba Network Browsing
Network browsing enables Windows and Samba servers to appear in the Windows Network Neighborhood
. Inside the Network Neighborhood
, icons are represented as servers and if opened, the server’s shares and printers that are available are displayed.
Network browsing capabilities require NetBIOS over TCP
/IP
. NetBIOS-based networking uses broadcast (UDP
) messaging to accomplish browse list management. Without NetBIOS and WINS as the primary method for TCP
/IP
host name resolution, other methods such as static files (/etc/hosts
) or DNS
, must be used.
A domain master browser collates the browse lists from local master browsers on all subnets so that browsing can occur between workgroups and subnets. Also, the domain master browser should preferably be the local master browser for its own subnet.
Domain Browsing
By default, a Windows server PDC for a domain is also the domain master browser for that domain. A Samba server must not be set up as a domain master server in this type of situation.
For subnets that do not include the Windows server PDC, a Samba server can be implemented as a local master browser. Configuring the /etc/samba/smb.conf
file for a local master browser (or no browsing at all) in a domain controller environment is the same as workgroup configuration (see Configuring a Samba Server).
WINS (Windows Internet Name Server)
Either a Samba server or a Windows NT server can function as a WINS server. When a WINS server is used with NetBIOS enabled, UDP unicasts can be routed which allows name resolution across networks. Without a WINS server, the UDP broadcast is limited to the local subnet and therefore cannot be routed to other subnets, workgroups, or domains. If WINS replication is necessary, do not use Samba as your primary WINS server, as Samba does not currently support WINS replication.
In a mixed NT/2000/2003/2008 server and Samba environment, it is recommended that you use the Microsoft WINS capabilities. In a Samba-only environment, it is recommended that you use only one Samba server for WINS.
The following is an example of the /etc/samba/smb.conf
file in which the Samba server is serving as a WINS server:
[global] wins support = yes
Using WINS
All servers (including Samba) should connect to a WINS server to resolve NetBIOS names. Without WINS, browsing only occurs on the local subnet. Furthermore, even if a domain-wide list is somehow obtained, hosts cannot be resolved for the client without WINS. |
Samba with CUPS Printing Support
Samba allows client machines to share printers connected to the Samba server. In addition, Samba also allows client machines to send documents built in Linux to Windows printer shares. Although there are other printing systems that function with Fedora, CUPS (Common UNIX Print System) is the recommended printing system due to its close integration with Samba.
Simple smb.conf
Settings
The following example shows a very basic /etc/samba/smb.conf
configuration for CUPS support:
[global] load printers = yes printing = cups printcap name = cups [printers] comment = All Printers path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes printer admin = @ntadmins [print$] comment = Printer Drivers Share path = /var/lib/samba/drivers write list = ed, john printer admin = ed, john
Other printing configurations are also possible. To add additional security and privacy for printing confidential documents, users can have their own print spooler not located in a public path. If a job fails, other users would not have access to the file.
The print$
directive contains printer drivers for clients to access if not available locally. The print$
directive is optional and may not be required depending on the organization.
Setting browseable
to yes
enables the printer to be viewed in the Windows Network Neighborhood, provided the Samba server is set up correctly in the domain or workgroup.
Samba Distribution Programs
.net
net <protocol> <function> <misc_options> <target_options>
The net
utility is similar to the net
utility used for Windows and MS-DOS. The first argument is used to specify the protocol to use when executing a command. The protocol
option can be ads
, rap
, or rpc
for specifying the type of server connection. Active Directory uses ads
, Win9x/NT3 uses rap
, and Windows NT4/2000/2003/2008 uses rpc
. If the protocol is omitted, net
automatically tries to determine it.
The following example displays a list of the available shares for a host named wakko
:
~]$ net -l share -S wakko
Password:
Enumerating shared resources (exports) on remote server:
Share name Type Description
---------- ---- -----------
data Disk Wakko data share
tmp Disk Wakko tmp share
IPC$ IPC IPC Service (Samba Server)
ADMIN$ IPC IPC Service (Samba Server)
The following example displays a list of Samba users for a host named wakko
:
~]$ net -l user -S wakko
root password:
User name Comment
-----------------------------
andriusb Documentation
joe Marketing
lisa Sales
nmblookup
nmblookup <options> <netbios_name>
The nmblookup
program resolves NetBIOS names into IP
addresses. The program broadcasts its query on the local subnet until the target machine replies.
The following example displays the IP
address of the NetBIOS name trek
:
~]$ nmblookup trek querying trek on 10.1.59.255 10.1.56.45 trek<00>
pdbedit
pdbedit <options>
The pdbedit
program manages accounts located in the SAM database. All back ends are supported including smbpasswd
, LDAP, and the tdb database library.
The following are examples of adding, deleting, and listing users:
~]$ pdbedit -a kristin new password: retype new password: Unix username: kristin NT username: Account Flags: [U ] User SID: S-1-5-21-1210235352-3804200048-1474496110-2012 Primary Group SID: S-1-5-21-1210235352-3804200048-1474496110-2077 Full Name: Home Directory: \\wakko\kristin HomeDir Drive: Logon Script: Profile Path: \\wakko\kristin\profile Domain: WAKKO Account desc: Workstations: Munged dial: Logon time: 0 Logoff time: Mon, 18 Jan 2038 22:14:07 GMT Kickoff time: Mon, 18 Jan 2038 22:14:07 GMT Password last set: Thu, 29 Jan 2004 08:29:28 GMT Password can change: Thu, 29 Jan 2004 08:29:28 GMT Password must change: Mon, 18 Jan 2038 22:14:07 GMT ~]$ pdbedit -v -L kristin Unix username: kristin NT username: Account Flags: [U ] User SID: S-1-5-21-1210235352-3804200048-1474496110-2012 Primary Group SID: S-1-5-21-1210235352-3804200048-1474496110-2077 Full Name: Home Directory: \\wakko\kristin HomeDir Drive: Logon Script: Profile Path: \\wakko\kristin\profile Domain: WAKKO Account desc: Workstations: Munged dial: Logon time: 0 Logoff time: Mon, 18 Jan 2038 22:14:07 GMT Kickoff time: Mon, 18 Jan 2038 22:14:07 GMT Password last set: Thu, 29 Jan 2004 08:29:28 GMT Password can change: Thu, 29 Jan 2004 08:29:28 GMT Password must change: Mon, 18 Jan 2038 22:14:07 GMT ~]$ pdbedit -L andriusb:505: joe:503: lisa:504: kristin:506: ~]$ pdbedit -x joe ~]$ pdbedit -L andriusb:505: lisa:504: kristin:506:
rpcclient
rpcclient <server> <options>
The rpcclient
program issues administrative commands using Microsoft RPCs, which provide access to the Windows administration graphical user interfaces (GUIs) for systems management. This is most often used by advanced users that understand the full complexity of Microsoft RPCs.
smbcacls
smbcacls <//server/share> <filename> <options>
The smbcacls
program modifies Windows ACLs on files and directories shared by a Samba server or a Windows server.
smbclient
smbclient <//server/share> <password> <options>
The smbclient
program is a versatile UNIX client which provides functionality similar to the ftp
utility.
smbcontrol
smbcontrol -i <options>
smbcontrol <options> <destination> <messagetype> <parameters>
The smbcontrol
program sends control messages to running smbd
, nmbd
, or winbindd
daemons. Executing smbcontrol -i runs commands interactively until a blank line or a 'q'
is entered.
smbpasswd
smbpasswd <options> <username> <password>
The smbpasswd
program manages encrypted passwords. This program can be run by a superuser to change any user’s password and also by an ordinary user to change their own Samba password.
smbspool
smbspool <job> <user> <title> <copies> <options> <filename>
The smbspool
program is a CUPS-compatible printing interface to Samba. Although designed for use with CUPS printers, smbspool can work with non-CUPS printers as well.
smbstatus
smbstatus <options>
The smbstatus
program displays the status of current connections to a Samba server.
smbtar
smbtar <options>
The smbtar
program performs backup and restores of Windows-based share files and directories to a local tape archive. Though similar to the tar
utility, the two are not compatible.
testparm
testparm <options> <filename> <hostname IP_address>
The testparm
program checks the syntax of the /etc/samba/smb.conf
file. If your smb.conf
file is in the default location (/etc/samba/smb.conf
) you do not need to specify the location. Specifying the host name and IP
address to the testparm
program verifies that the hosts.allow
and host.deny
files are configured correctly. The testparm
program also displays a summary of your smb.conf
file and the server’s role (stand-alone, domain, etc.) after testing. This is convenient when debugging as it excludes comments and concisely presents information for experienced administrators to read. For example:
~]$ testparm Load smb config files from /etc/samba/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[tmp]" Processing section "[html]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions <enter>
# Global parameters
[global]
workgroup = MYGROUP
server string = Samba Server
security = SHARE
log file = /var/log/samba/%m.log
max log size = 50
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
dns proxy = no
[homes]
comment = Home Directories
read only = no
browseable = no
[printers]
comment = All Printers
path = /var/spool/samba
printable = yes
browseable = no
[tmp]
comment = Wakko tmp
path = /tmp
guest only = yes
[html]
comment = Wakko www
path = /var/www/html
force user = andriusb
force group = users
read only = no
guest only = yes
wbinfo
wbinfo <options>
The wbinfo
program displays information from the winbindd
daemon. The winbindd
daemon must be running for wbinfo
to work.
Additional Resources
The following sections give you the means to explore Samba in greater detail.
-
/usr/share/doc/samba-<version-number>/
— All additional files included with the Samba distribution. This includes all helper scripts, sample configuration files, and documentation. -
See the following man pages for detailed information specific Samba features:
-
smb.conf(5)
-
samba(7)
-
smbd(8)
-
nmbd(8)
-
winbindd(8)
-
-
https://www.samba.org/ — Homepage for the Samba distribution and all official documentation created by the Samba development team. Many resources are available in HTML and PDF formats, while others are only available for purchase. Although many of these links are not Fedora specific, some concepts may apply.
-
https://wiki.samba.org/index.php/User_Documentation — Samba 4.x official documentation.
-
https://www.samba.org/samba/archives.html — Active email lists for the Samba community. Enabling digest mode is recommended due to high levels of list activity.
-
Samba newsgroups — Samba threaded newsgroups, such as www.gmane.org, that use the
NNTP
protocol are also available. This an alternative to receiving mailing list emails.
FTP
File Transfer Protocol (FTP
) is one of the oldest and most commonly used protocols found on the Internet today. Its purpose is to reliably transfer files between computer hosts on a network without requiring the user to log directly into the remote host or have knowledge of how to use the remote system. It allows users to access files on remote systems using a standard set of simple commands.
This section outlines the basics of the FTP
protocol, as well as configuration options for the primary FTP
server shipped with Fedora, vsftpd.
The File Transfer Protocol
However, because FTP
is so prevalent on the Internet, it is often required to share files to the public. System administrators, therefore, should be aware of the FTP
protocol’s unique characteristics.
Multiple Ports, Multiple Modes
Unlike most protocols used on the Internet, FTP
requires multiple network ports to work properly. When an FTP
client application initiates a connection to an FTP
server, it opens port 21 on the server — known as the command port. This port is used to issue all commands to the server. Any data requested from the server is returned to the client via a data port. The port number for data connections, and the way in which data connections are initialized, vary depending upon whether the client requests the data in active or passive mode.
The following defines these modes:
- active mode
-
Active mode is the original method used by the
FTP
protocol for transferring data to the client application. When an active mode data transfer is initiated by theFTP
client, the server opens a connection from port 20 on the server to theIP
address and a random, unprivileged port (greater than 1024) specified by the client. This arrangement means that the client machine must be allowed to accept connections over any port above 1024. With the growth of insecure networks, such as the Internet, the use of firewalls to protect client machines is now prevalent. Because these client-side firewalls often deny incoming connections from active modeFTP
servers, passive mode was devised. - passive mode
-
Passive mode, like active mode, is initiated by the
FTP
client application. When requesting data from the server, theFTP
client indicates it wants to access the data in passive mode and the server provides theIP
address and a random, unprivileged port (greater than 1024) on the server. The client then connects to that port on the server to download the requested information.While passive mode resolves issues for client-side firewall interference with data connections, it can complicate administration of the server-side firewall. You can reduce the number of open ports on a server by limiting the range of unprivileged ports on the
FTP
server. This also simplifies the process of configuring firewall rules for the server. See Network Options for more information about limiting passive ports.
FTP Servers
Fedora ships with two different FTP
servers:
-
proftpd - A fast, stable, and highly configurable FTP server.
-
vsftpd — A fast, secure
FTP
daemon which is the preferredFTP
server for Fedora. The remainder of this section focuses on vsftpd.
vsftpd
The Very Secure FTP Daemon (vsftpd) is designed from the ground up to be fast, stable, and, most importantly, secure. vsftpd is the only stand-alone FTP
server distributed with Fedora, due to its ability to handle large numbers of connections efficiently and securely.
The security model used by vsftpd has three primary aspects:
-
Strong separation of privileged and non-privileged processes — Separate processes handle different tasks, and each of these processes run with the minimal privileges required for the task.
-
Tasks requiring elevated privileges are handled by processes with the minimal privilege necessary — By leveraging compatibilities found in the
libcap
library, tasks that usually require fullroot
privileges can be executed more safely from a less privileged process. -
Most processes run in a chroot jail — Whenever possible, processes are change-rooted to the directory being shared; this directory is then considered a chroot jail. For example, if the directory /var/ftp/ is the primary shared directory, vsftpd reassigns /var/ftp/ to the new root directory, known as /. This disallows any potential malicious hacker activities for any directories not contained below the new root directory.
Use of these security practices has the following effect on how vsftpd deals with requests:
-
The parent process runs with the least privileges required — The parent process dynamically calculates the level of privileges it requires to minimize the level of risk. Child processes handle direct interaction with the
FTP
clients and run with as close to no privileges as possible. -
All operations requiring elevated privileges are handled by a small parent process — Much like the Apache
HTTP
Server, vsftpd launches unprivileged child processes to handle incoming connections. This allows the privileged, parent process to be as small as possible and handle relatively few tasks. -
All requests from unprivileged child processes are distrusted by the parent process — Communication with child processes are received over a socket, and the validity of any information from child processes is checked before being acted on.
-
Most interaction with
FTP
clients is handled by unprivileged child processes in a chroot jail — Because these child processes are unprivileged and only have access to the directory being shared, any crashed processes only allows the attacker access to the shared files.
Files Installed with vsftpd
The vsftpd
RPM installs the daemon (/usr/sbin/vsftpd
), its configuration and related files, as well as FTP
directories onto the system. The following lists the files and directories related to vsftpd configuration:
-
/etc/rc.d/init.d/vsftpd
— The initialization script (initscript) used by the systemctl command to start, stop, or reload vsftpd. See Starting and Stopping vsftpd for more information about using this script. -
/etc/pam.d/vsftpd
— The Pluggable Authentication Modules (PAM) configuration file for vsftpd. This file specifies the requirements a user must meet to login to theFTP
server. For more information on PAM, refer to the Using Pluggable Authentication Modules (PAM) chapter of the Fedora 32 Managing Single Sign-On and Smart Cards guide. -
/etc/vsftpd/vsftpd.conf
— The configuration file for vsftpd. See vsftpd Configuration Options for a list of important options contained within this file. -
/etc/vsftpd/ftpusers
— A list of users not allowed to log into vsftpd. By default, this list includes theroot
,bin
, anddaemon
users, among others. -
/etc/vsftpd/user_list
— This file can be configured to either deny or allow access to the users listed, depending on whether the userlist_deny directive is set to YES (default) or NO in/etc/vsftpd/vsftpd.conf
. If/etc/vsftpd/user_list
is used to grant access to users, the usernames listed must not appear in/etc/vsftpd/ftpusers
. -
/var/ftp/
— The directory containing files served by vsftpd. It also contains the/var/ftp/pub/
directory for anonymous users. Both directories are world-readable, but writable only by theroot
user.
Starting and Stopping vsftpd
The vsftpd
RPM installs the /etc/rc.d/init.d/vsftpd
script, which can be accessed using the systemctl command.
To start the server, as root
type:
systemctl start vsftpd.service
To stop the server, as root
type:
systemctl stop vsftpd.service
The restart
option is a shorthand way of stopping and then starting vsftpd. This is the most efficient way to make configuration changes take effect after editing the configuration file for vsftpd.
To restart the server, as root
type:
systemctl restart vsftpd.service
The condrestart
(conditional restart) option only starts vsftpd if it is currently running. This option is useful for scripts, because it does not start the daemon if it is not running.
To conditionally restart the server, as root
type:
systemctl condrestart vsftpd.service
By default, the vsftpd service does not start automatically at boot time. To configure the vsftpd service to start at boot time, use a service manager such as systemctl. See Services and Daemons for more information on how to configure services in Fedora.
Configuring the Firewall for FTP
By default, firewalld
blocks incoming FTP connections. To allow FTP connections, as root
type:
firewall-cmd --add-service=ftp
The change will be applied immediately, but will be lost next time firewalld
is reloaded or the system restarted. To make it permanent, type:
firewall-cmd --permanent --add-service=ftp
For more information on configuring firewalld
, see the Red Hat Enterprise Linux 7 Security Guide.
Starting Multiple Copies of vsftpd
Sometimes one computer is used to serve multiple FTP
domains. This is a technique called multihoming. One way to multihome using vsftpd is by running multiple copies of the daemon, each with its own configuration file.
To do this, first assign all relevant IP
addresses to network devices or alias network devices on the system. For more information about configuring network devices, device aliases, and additional information about network configuration scripts, refer to the Fedora Networking Guide.
Next, the DNS server for the FTP
domains must be configured to reference the correct machine. For information about BIND and its configuration files, refer to the Fedora Networking Guide.
If there is more configuration files present in the /etc/vsftpd
directory, calling systemctl start vsftpd.service results in the /etc/rc.d/init.d/vsftpd
initscript starting the same number of processes as the number of configuration files. Each configuration file must have a unique name in the /etc/vsftpd/
directory and must be readable and writable only by root
.
vsftpd Configuration Options
Although vsftpd may not offer the level of customization other widely available FTP
servers have, it offers enough options to fill most administrator’s needs. The fact that it is not overly feature-laden limits configuration and programmatic errors.
All configuration of vsftpd is handled by its configuration file, /etc/vsftpd/vsftpd.conf
. Each directive is on its own line within the file and follows the following format:
directive=value
For each directive, replace directive with a valid directive and value with a valid value.
Do not use spaces
There must not be any spaces between the directive, equal symbol, and the value in a directive. |
Comment lines must be preceded by a hash sign (#) and are ignored by the daemon.
For a complete list of all directives available, refer to the man page for vsftpd.conf
.
Securing the vsftpd service
For an overview of ways to secure vsftpd, see the Red Hat Enterprise Linux 7 Security Guide. |
The following is a list of some of the more important directives within /etc/vsftpd/vsftpd.conf
. All directives not explicitly found or commented out within vsftpd's configuration file are set to their default value.
Daemon Options
The following is a list of directives which control the overall behavior of the vsftpd daemon.
-
listen — When enabled, vsftpd runs in stand-alone mode. Fedora sets this value to YES. This directive cannot be used in conjunction with the listen_ipv6 directive.
The default value is NO.
-
listen_ipv6 — When enabled, vsftpd runs in stand-alone mode, but listens only to
IPv6
sockets. This directive cannot be used in conjunction with the listen directive.The default value is NO.
-
session_support — When enabled, vsftpd attempts to maintain login sessions for each user through Pluggable Authentication Modules (PAM). For more information, refer to the Using Pluggable Authentication Modules (PAM) chapter of the Red Hat Enterprise Linux 6 Managing Single Sign-On and Smart Cards and the PAM man pages. . If session logging is not necessary, disabling this option allows vsftpd to run with less processes and lower privileges.
The default value is YES.
Log In Options and Access Controls
The following is a list of directives which control the login behavior and access control mechanisms.
-
anonymous_enable — When enabled, anonymous users are allowed to log in. The usernames
anonymous
andftp
are accepted.The default value is YES.
See Anonymous User Options for a list of directives affecting anonymous users.
-
banned_email_file — If the deny_email_enable directive is set to YES, this directive specifies the file containing a list of anonymous email passwords which are not permitted access to the server.
The default value is
/etc/vsftpd/banned_emails
. -
banner_file — Specifies the file containing text displayed when a connection is established to the server. This option overrides any text specified in the ftpd_banner directive.
There is no default value for this directive.
-
cmds_allowed — Specifies a comma-delimited list of
FTP
commands allowed by the server. All other commands are rejected.There is no default value for this directive.
-
deny_email_enable — When enabled, any anonymous user utilizing email passwords specified in the
/etc/vsftpd/banned_emails
are denied access to the server. The name of the file referenced by this directive can be specified using the banned_email_file directive.The default value is NO.
-
ftpd_banner — When enabled, the string specified within this directive is displayed when a connection is established to the server. This option can be overridden by the banner_file directive.
By default vsftpd displays its standard banner.
-
local_enable — When enabled, local users are allowed to log into the system.
The default value is YES.
See Local User Options for a list of directives affecting local users.
-
pam_service_name — Specifies the PAM service name for vsftpd.
The default value is ftp. Note, in Fedora, the value is set to vsftpd.
-
The default value is NO. Note, in Fedora, the value is set to YES.
-
userlist_deny — When used in conjunction with the userlist_enable directive and set to NO, all local users are denied access unless the username is listed in the file specified by the userlist_file directive. Because access is denied before the client is asked for a password, setting this directive to NO prevents local users from submitting unencrypted passwords over the network.
The default value is YES.
-
userlist_enable — When enabled, the users listed in the file specified by the userlist_file directive are denied access. Because access is denied before the client is asked for a password, users are prevented from submitting unencrypted passwords over the network.
The default value is NO, however under Fedora the value is set to YES.
-
userlist_file — Specifies the file referenced by vsftpd when the userlist_enable directive is enabled.
The default value is /etc/vsftpd/user_list and is created during installation.
Anonymous User Options
The following lists directives which control anonymous user access to the server. To use these options, the anonymous_enable directive must be set to YES.
-
anon_mkdir_write_enable — When enabled in conjunction with the write_enable directive, anonymous users are allowed to create new directories within a parent directory which has write permissions.
The default value is NO.
-
anon_root — Specifies the directory vsftpd changes to after an anonymous user logs in.
There is no default value for this directive.
-
anon_upload_enable — When enabled in conjunction with the write_enable directive, anonymous users are allowed to upload files within a parent directory which has write permissions.
The default value is NO.
-
anon_world_readable_only — When enabled, anonymous users are only allowed to download world-readable files.
The default value is YES.
-
ftp_username — Specifies the local user account (listed in
/etc/passwd
) used for the anonymousFTP
user. The home directory specified in/etc/passwd
for the user is the root directory of the anonymousFTP
user.The default value is ftp.
-
no_anon_password — When enabled, the anonymous user is not asked for a password.
The default value is NO.
-
secure_email_list_enable — When enabled, only a specified list of email passwords for anonymous logins are accepted. This is a convenient way to offer limited security to public content without the need for virtual users.
Anonymous logins are prevented unless the password provided is listed in /etc/vsftpd/email_passwords. The file format is one password per line, with no trailing white spaces.
The default value is NO.
Local User Options
The following lists directives which characterize the way local users access the server. To use these options, the local_enable directive must be set to YES.
-
chmod_enable — When enabled, the
FTP
command SITE CHMOD is allowed for local users. This command allows the users to change the permissions on files.The default value is YES.
-
chroot_list_enable — When enabled, the local users listed in the file specified in the chroot_list_file directive are placed in a chroot jail upon log in.
If enabled in conjunction with the chroot_local_user directive, the local users listed in the file specified in the chroot_list_file directive are not placed in a chroot jail upon log in.
The default value is NO.
-
chroot_list_file — Specifies the file containing a list of local users referenced when the chroot_list_enable directive is set to YES.
The default value is /etc/vsftpd/chroot_list.
-
chroot_local_user — When enabled, local users are change-rooted to their home directories after logging in.
The default value is NO.
Avoid enabling the chroot_local_user optionEnabling chroot_local_user opens up a number of security issues, especially for users with upload privileges. For this reason, it is not recommended.
-
guest_enable — When enabled, all non-anonymous users are logged in as the user guest, which is the local user specified in the guest_username directive.
The default value is NO.
-
guest_username — Specifies the username the guest user is mapped to.
The default value is ftp.
-
local_root — Specifies the directory vsftpd changes to after a local user logs in.
There is no default value for this directive.
-
local_umask — Specifies the umask value for file creation. Note that the default value is in octal form (a numerical system with a base of eight), which includes a "0" prefix. Otherwise the value is treated as a base-10 integer.
The default value is 022.
-
passwd_chroot_enable — When enabled in conjunction with the chroot_local_user directive, vsftpd change-roots local users based on the occurrence of the /./ in the home directory field within
/etc/passwd
.The default value is NO.
-
user_config_dir — Specifies the path to a directory containing configuration files bearing the name of local system users that contain specific setting for that user. Any directive in the user’s configuration file overrides those found in
/etc/vsftpd/vsftpd.conf
.There is no default value for this directive.
Directory Options
The following lists directives which affect directories.
-
dirlist_enable — When enabled, users are allowed to view directory lists.
The default value is YES.
-
dirmessage_enable — When enabled, a message is displayed whenever a user enters a directory with a message file. This message resides within the current directory. The name of this file is specified in the message_file directive and is
.message
by default.The default value is NO. Note, in Fedora, the value is set to YES.
-
force_dot_files — When enabled, files beginning with a dot (
.
) are listed in directory listings, with the exception of the.
and..
files.The default value is NO.
-
hide_ids — When enabled, all directory listings show
ftp
as the user and group for each file.The default value is NO.
-
message_file — Specifies the name of the message file when using the dirmessage_enable directive.
The default value is .message.
-
text_userdb_names — When enabled, text usernames and group names are used in place of UID and GID entries. Enabling this option may slow performance of the server.
The default value is NO.
-
use_localtime — When enabled, directory listings reveal the local time for the computer instead of GMT.
The default value is NO.
File Transfer Options
The following lists directives which affect directories.
-
download_enable — When enabled, file downloads are permitted.
The default value is YES.
-
chown_uploads — When enabled, all files uploaded by anonymous users are owned by the user specified in the chown_username directive.
The default value is NO.
-
chown_username — Specifies the ownership of anonymously uploaded files if the chown_uploads directive is enabled.
The default value is root.
-
write_enable — When enabled,
FTP
commands which can change the file system are allowed, such as DELE, RNFR, and STOR.The default value is YES.
Logging Options
The following lists directives which affect vsftpd's logging behavior.
-
dual_log_enable — When enabled in conjunction with xferlog_enable, vsftpd writes two files simultaneously: a wu-ftpd-compatible log to the file specified in the xferlog_file directive (
/var/log/xferlog
by default) and a standard vsftpd log file specified in the vsftpd_log_file directive (/var/log/vsftpd.log
by default).The default value is NO.
-
log_ftp_protocol — When enabled in conjunction with xferlog_enable and with xferlog_std_format set to NO, all
FTP
commands and responses are logged. This directive is useful for debugging.The default value is NO.
-
syslog_enable — When enabled in conjunction with xferlog_enable, all logging normally written to the standard vsftpd log file specified in the vsftpd_log_file directive (
/var/log/vsftpd.log
by default) is sent to the system logger instead under theFTPD
facility.The default value is NO.
-
vsftpd_log_file — Specifies the vsftpd log file. For this file to be used, xferlog_enable must be enabled and xferlog_std_format must either be set to NO or, if xferlog_std_format is set to YES, dual_log_enable must be enabled. It is important to note that if syslog_enable is set to YES, the system log is used instead of the file specified in this directive.
The default value is
/var/log/vsftpd.log
. -
xferlog_enable — When enabled, vsftpd logs connections (vsftpd format only) and file transfer information to the log file specified in the vsftpd_log_file directive (
/var/log/vsftpd.log
by default). If xferlog_std_format is set to YES, file transfer information is logged but connections are not, and the log file specified in xferlog_file (/var/log/xferlog
by default) is used instead. It is important to note that both log files and log formats are used if dual_log_enable is set to YES.The default value is NO. Note, in Fedora, the value is set to YES.
-
xferlog_file — Specifies the wu-ftpd-compatible log file. For this file to be used, xferlog_enable must be enabled and xferlog_std_format must be set to YES. It is also used if dual_log_enable is set to YES.
The default value is
/var/log/xferlog
. -
xferlog_std_format — When enabled in conjunction with xferlog_enable, only a wu-ftpd-compatible file transfer log is written to the file specified in the xferlog_file directive (
/var/log/xferlog
by default). It is important to note that this file only logs file transfers and does not log connections to the server.The default value is NO. Note, in Fedora, the value is set to YES.
Maintaining compatibility with older log file formats
To maintain compatibility with log files written by the older wu-ftpd To both log connections in vsftpd format and maintain a wu-ftpd-compatible file transfer log, set dual_log_enable to YES. If maintaining a wu-ftpd-compatible file transfer log is not important, either set xferlog_std_format to NO, comment the line with a hash sign (#), or delete the line entirely. |
Network Options
The following lists directives which affect how vsftpd interacts with the network.
-
accept_timeout — Specifies the amount of time for a client using passive mode to establish a connection.
The default value is 60.
-
anon_max_rate — Specifies the maximum data transfer rate for anonymous users in bytes per second.
The default value is 0, which does not limit the transfer rate.
-
connect_from_port_20 When enabled, vsftpd runs with enough privileges to open port 20 on the server during active mode data transfers. Disabling this option allows vsftpd to run with less privileges, but may be incompatible with some
FTP
clients.The default value is NO. Note, in Fedora, the value is set to YES.
-
connect_timeout — Specifies the maximum amount of time a client using active mode has to respond to a data connection, in seconds.
The default value is 60.
-
data_connection_timeout — Specifies maximum amount of time data transfers are allowed to stall, in seconds. Once triggered, the connection to the remote client is closed.
The default value is 300.
-
ftp_data_port — Specifies the port used for active data connections when connect_from_port_20 is set to YES.
The default value is 20.
-
idle_session_timeout — Specifies the maximum amount of time between commands from a remote client. Once triggered, the connection to the remote client is closed.
The default value is 300.
-
listen_address — Specifies the
IP
address on which vsftpd listens for network connections.There is no default value for this directive.
Running multiple copies of vsftpdIf running multiple copies of vsftpd serving different
IP
addresses, the configuration file for each copy of the vsftpd daemon must have a different value for this directive. See Starting Multiple Copies of vsftpd for more information about multihomedFTP
servers. -
listen_address6 — Specifies the
IPv6
address on which vsftpd listens for network connections when listen_ipv6 is set to YES.There is no default value for this directive.
Running multiple copies of vsftpdIf running multiple copies of vsftpd serving different
IP
addresses, the configuration file for each copy of the vsftpd daemon must have a different value for this directive. See Starting Multiple Copies of vsftpd for more information about multihomedFTP
servers. -
listen_port — Specifies the port on which vsftpd listens for network connections.
The default value is 21.
-
local_max_rate — Specifies the maximum rate data is transferred for local users logged into the server in bytes per second.
The default value is 0, which does not limit the transfer rate.
-
max_clients — Specifies the maximum number of simultaneous clients allowed to connect to the server when it is running in standalone mode. Any additional client connections would result in an error message.
The default value is 0, which does not limit connections.
-
max_per_ip — Specifies the maximum of clients allowed to connected from the same source
IP
address.The default value is 0, which does not limit connections.
-
pasv_address — Specifies the
IP
address for the public facingIP
address of the server for servers behind Network Address Translation (NAT) firewalls. This enables vsftpd to hand out the correct return address for passive mode connections.There is no default value for this directive.
-
pasv_enable — When enabled, passive mode connects are allowed.
The default value is YES.
-
pasv_max_port — Specifies the highest possible port sent to the
FTP
clients for passive mode connections. This setting is used to limit the port range so that firewall rules are easier to create.The default value is 0, which does not limit the highest passive port range. The value must not exceed 65535.
-
pasv_min_port — Specifies the lowest possible port sent to the
FTP
clients for passive mode connections. This setting is used to limit the port range so that firewall rules are easier to create.The default value is 0, which does not limit the lowest passive port range. The value must not be lower 1024.
-
pasv_promiscuous — When enabled, data connections are not checked to make sure they are originating from the same
IP
address. This setting is only useful for certain types of tunneling.Avoid enabling the pasv_promiscuous optionDo not enable this option unless absolutely necessary as it disables an important security feature which verifies that passive mode connections originate from the same
IP
address as the control connection that initiates the data transfer.The default value is NO.
-
port_enable — When enabled, active mode connects are allowed.
The default value is YES.
Additional Resources
For more information about vsftpd, refer to the following resources.
Installed Documentation
-
The
/usr/share/doc/vsftpd/
directory — This directory contains aREADME
with basic information about the software. TheTUNING
file contains basic performance tuning tips and theSECURITY/
directory contains information about the security model employed by vsftpd. -
vsftpd related man pages — There are a number of man pages for the daemon and configuration files. The following lists some of the more important man pages.
- Server Applications
-
-
man vsftpd — Describes available command line options for vsftpd.
-
- Configuration Files
-
-
man vsftpd.conf — Contains a detailed list of options available within the configuration file for vsftpd.
-
man 5 hosts_access — Describes the format and options available within the TCP wrappers configuration files:
hosts.allow
andhosts.deny
.
-
Useful Websites
-
https://security.appspot.com/vsftpd.html — The vsftpd project page is a great place to locate the latest documentation and to contact the author of the software.
-
https://slacksite.com/other/ftp.html — This website provides a concise explanation of the differences between active and passive mode
FTP
. -
https://www.ietf.org/rfc/rfc0959.txt — The original Request for Comments (RFC) of the
FTP
protocol from the IETF.
Printer Configuration
The Printers configuration tool serves for printer configuring, maintenance of printer configuration files, print spool directories and print filters, and printer classes management.
The tool is based on the Common Unix Printing System (CUPS). If you upgraded the system from a previous Fedora version that used CUPS, the upgrade process preserved the configured printers.
Using the CUPS web application or command-line tools
You can perform the same and additional operations on printers directly from the CUPS web application or command line. To access the application, in a web browser, go to http://localhost:631/. For CUPS manuals refer to the links on the |
Starting the Printers Configuration Tool
With the Printers configuration tool you can perform various operations on existing printers and set up new printers. You can also use CUPS directly (go to http://localhost:631/ to access the CUPS web application).
To start the Printers configuration tool if using the GNOME desktop, press the Super key to enter the Activities Overview, type Printers, and then press Enter. The Printers configuration tool appears. The Super key appears in a variety of guises, depending on the keyboard and other hardware, but often as either the Windows or Command key, and typically to the left of the Spacebar.
The Printers
window depicted in Printers Configuration window appears.
![Printers Configuration window](../../_images/printconf-main.png)
Starting Printer Setup
Printer setup process varies depending on the printer queue type.
If you are setting up a local printer connected with USB, the printer is discovered and added automatically. You will be prompted to confirm the packages to be installed and provide an administrator or the root
user password. Local printers connected with other port types and network printers need to be set up manually.
Follow this procedure to start a manual printer setup:
-
Start the Printers configuration tool (refer to Starting the Printers Configuration Tool).
-
Select
Unlock
to enable changes to be made. In theAuthentication Required
box, type an administrator or theroot
user password and confirm. -
Select the plus sign to open the
Add a New Printer
dialog. Select the printer from the list or enter its address below.
Adding a Local Printer
Follow this procedure to add a local printer connected with other than a serial port:
-
Open the
Add a New Printer
dialog (refer to Starting Printer Setup). -
If the device does not appear automatically, select the port to which the printer is connected in the list on the left (such as
Serial Port #1
orLPT #1
). -
On the right, enter the connection properties:
- for
Enter URI
-
URI
(for example file:/dev/lp0) - for
Serial Port
-
Baud Rate
- for
Parity
Data Bits
Flow Control
![Adding a local printer](../../_images/print_conf_window.png)
-
Click Forward.
-
Select the printer model. See Selecting the Printer Model and Finishing for details.
Adding an AppSocket/HP JetDirect printer
Follow this procedure to add an AppSocket/HP JetDirect printer:
-
Open the
Add a New Printer
dialog (refer to Starting the Printers Configuration Tool). -
In the list on the left, select
. -
On the right, enter the connection settings:
Hostname
-
Printer host name or
IP
address. Port Number
-
Printer port listening for print jobs (
9100
by default).
![Adding a JetDirect Printer](../../_images/printconf-jetdirect.png)
-
Click Forward.
-
Select the printer model. See Selecting the Printer Model and Finishing for details.
Adding an IPP Printer
An IPP
printer is a printer attached to a different system on the same TCP/IP network. The system this printer is attached to may either be running CUPS or simply configured to use IPP
.
If a firewall is enabled on the printer server, then the firewall must be configured to allow incoming TCP
connections on port 631
. Note that the CUPS browsing protocol allows client machines to discover shared CUPS queues automatically. To enable this, the firewall on the client machine must be configured to allow incoming UDP
packets on port 631
.
Follow this procedure to add an IPP
printer:
-
Open the
Printers
dialog (refer to Starting Printer Setup). -
In the list of devices on the left, select Network Printer and
Internet Printing Protocol (ipp)
orInternet Printing Protocol (https)
. -
On the right, enter the connection settings:
Host
-
The host name of the
IPP
printer. Queue
-
The queue name to be given to the new queue (if the box is left empty, a name based on the device node will be used).
![Networked IPP Printer](../../_images/printconf-ipp.png)
-
Optionally, click Verify to detect the printer.
-
Click Forward to continue.
-
Select the printer model. See Selecting the Printer Model and Finishing for details.
Adding an LPD/LPR Host or Printer
Follow this procedure to add an LPD/LPR host or printer:
-
Open the
New Printer
dialog (refer to Starting Printer Setup). -
In the list of devices on the left, select
. -
On the right, enter the connection settings:
Host
-
The host name of the LPD/LPR printer or host.
Optionally, click Probe to find queues on the LPD host.
Queue
-
The queue name to be given to the new queue (if the box is left empty, a name based on the device node will be used).
![Adding an LPD/LPR Printer](../../_images/printconf-lpd.png)
-
Click Forward to continue.
-
Select the printer model. See Selecting the Printer Model and Finishing for details.
Adding a Samba (SMB) printer
Follow this procedure to add a Samba printer:
Installing the samba-client package
Note that in order to add a Samba printer, you need to have the samba-client package installed. You can do so by running, as dnf install samba-client
For more information on installing packages with DNF, refer to Installing Packages. |
-
Open the
New Printer
dialog (refer to Starting Printer Setup). -
In the list on the left, select
. -
Enter the SMB address in the
smb://
field. Use the format computer name/printer share. In Adding a SMB printer, the computer name is dellbox and the printer share is r2.
![SMB Printer](../../_images/printconf-smb.png)
-
Click Browse to see the available workgroups/domains. To display only queues of a particular host, type in the host name (NetBios name) and click Browse.
-
Select either of the options:
-
Prompt user if authentication is required
: user name and password are collected from the user when printing a document. -
Set authentication details now
: provide authentication information now so it is not required later. In theUsername
field, enter the user name to access the printer. This user must exist on the SMB system, and the user must have permission to access the printer. The default user name is typicallyguest
for Windows servers, ornobody
for Samba servers.
-
-
Enter the
Password
(if required) for the user specified in theUsername
field.
Be careful when choosing a password
Samba printer user names and passwords are stored in the printer server as unencrypted files readable by Therefore, when you choose a user name and password to access a Samba printer, it is advisable that you choose a password that is different from what you use to access your local Fedora system. If there are files shared on the Samba print server, it is recommended that they also use a password different from what is used by the print queue. |
-
Click Verify to test the connection. Upon successful verification, a dialog box appears confirming printer share accessibility.
-
Click Forward.
-
Select the printer model. See Selecting the Printer Model and Finishing for details.
Selecting the Printer Model and Finishing
Once you have properly selected a printer connection type, the system attempts to acquire a driver. If the process fails, you can locate or search for the driver resources manually.
Follow this procedure to provide the printer driver and finish the installation:
-
In the window displayed after the automatic driver detection has failed, select one of the following options:
-
Select printer from database
— the system chooses a driver based on the selected make of your printer from the list ofMakes
. If your printer model is not listed, chooseGeneric
. -
Provide PPD file
— the system uses the provided PostScript Printer Description (PPD) file for installation. A PPD file may also be delivered with your printer as being normally provided by the manufacturer. If the PPD file is available, you can choose this option and use the browser bar below the option description to select the PPD file. -
Search for a printer driver to download
— enter the make and model of your printer into theMake and model
field to search on OpenPrinting.org for the appropriate packages.
-
![Selecting a printer brand from the printer database brands.](../../_images/printconf-select-model.png)
-
Depending on your previous choice provide details in the area displayed below:
-
Printer brand for the
Select printer from database
option. -
PPD file location for the
Provide PPD file
option. -
Printer make and model for the
Search for a printer driver to download
option.
-
-
Click Forward to continue.
-
If applicable for your option, window shown in Selecting a printer model appears. Choose the corresponding model in the
Models
column on the left.
Selecting a printer driver
On the right, the recommended printer driver is automatically selected; however, you can select another available driver. The print driver processes the data that you want to print into a format the printer can understand. Since a local printer is attached directly to your computer, you need a printer driver to process the data that is sent to the printer. |
![Selecting a Printer Model with a Driver Menu](../../_images/printconf-select-driver.png)
-
Click Forward.
-
Under the
Describe Printer
enter a unique name for the printer in thePrinter Name
field. The printer name can contain letters, numbers, dashes (-), and underscores (_); it must not contain any spaces. You can also use theDescription
andLocation
fields to add further printer information. Both fields are optional, and may contain spaces.
![Printer Setup](../../_images/printconf-add-printer.png)
-
Click Apply to confirm your printer configuration and add the print queue if the settings are correct. Click Back to modify the printer configuration.
-
After the changes are applied, a dialog box appears allowing you to print a test page. Click Print Test Page to print a test page now. Alternatively, you can print a test page later as described in Printing a Test Page.
Printing a Test Page
After you have set up a printer or changed a printer configuration, print a test page to make sure the printer is functioning properly:
-
Right-click the printer in the
Printing
window and clickProperties
. -
In the Properties window, click
Settings
on the left. -
On the displayed
Settings
tab, click the Print Test Page button.
Modifying Existing Printers
To delete an existing printer, in the Printer
configuration window, select the printer and go to . Confirm the printer deletion. Alternatively, press the Delete key.
To set the default printer, right-click the printer in the printer list and click the Set As Default
button in the context menu.
The Settings Page
To change printer driver configuration, double-click the corresponding name in the Printer
list and click the Settings
label on the left to display the Settings
page.
You can modify printer settings such as make and model, print a test page, change the device location (URI), and more.
![Settings Page](../../_images/printconf-config1.png)
The Policies Page
Click the Policies
button on the left to change settings in printer state and print output.
You can select the printer states, configure the Error Policy
of the printer (you can decide to abort the print job, retry, or stop it if an error occurs).
You can also create a banner page (a page that describes aspects of the print job such as the originating printer, the user name from the which the job originated, and the security status of the document being printed): click the Starting Banner
or Ending Banner
drop-down menu and choose the option that best describes the nature of the print jobs (for example, confidential
).
On the Policies
page, you can mark a printer as shared: if a printer is shared, users published on the network can use it. To allow the sharing function for printers, go to and select Publish shared printers connected to this system
.
![Policies Page](../../_images/printconf-config2.png)
Make sure that the firewall allows incoming TCP
connections to port 631
, the port for the Network Printing Server (IPP
) protocol. To allow IPP
traffic through the firewall on Fedora 32, make use of firewalld
's IPP
service. To do so, proceed as follows:
-
To start the graphical firewall-config tool, press the Super key to enter the Activities Overview, type firewall and then press Enter. The
Firewall Configuration
window opens. You will be prompted for an administrator orroot
password.
Alternatively, to start the graphical firewall configuration tool using the command line, enter the following command as root
user:
~]# firewall-config
The Firewall Configuration
window opens.
Look for the word "Connected" in the lower left corner. This indicates that the firewall-config tool is connected to the user space daemon, firewalld
.
To immediately change the current firewall settings, ensure the drop-down selection menu labeled Configuration
is set to Runtime
. Alternatively, to edit the settings to be applied at the next system start, or firewall reload, select Permanent
from the drop-down list.
-
Select the
Zones
tab and then select the firewall zone to correspond with the network interface to be used. The default is thepublic
zone. TheInterfaces
tab shows what interfaces have been assigned to a zone. -
Select the
Services
tab and then select theipp
service to enable sharing. Theipp-client
service is required for accessing network printers. -
Close the firewall-config tool.
You can change user-level access to the configured printer on the Access Control
page. Click the Access Control
label on the left to display the page. Select either Allow printing for everyone except these users
or Deny printing for everyone except these users
and define the user set below: enter the user name in the text box and click the Add button to add the user to the user set.
![Access Control Page](../../_images/printconf-config3.png)
The Printer Options
page contains various configuration options for the printer media and output, and its content may vary from printer to printer. It contains general printing, paper, quality, and printing size settings.
![Printer Options Page](../../_images/printconf-config4.png)
On the Job Options
page, you can detail the printer job options. Click the Job Options
label on the left to display the page. Edit the default settings to apply custom job options, such as number of copies, orientation, pages per side, scaling (increase or decrease the size of the printable area, which can be used to fit an oversize print area onto a smaller physical sheet of print medium), detailed text options, and custom job options.
![Job Options Page](../../_images/printconf-config5.png)
The Ink/Toner Levels
page contains details on toner status if available and printer status messages. Click the Ink/Toner Levels
label on the left to display the page.
![Ink/Toner Levels Page](../../_images/printconf-config6.png)
Managing Print Jobs
When you send a print job to the printer daemon, such as printing a text file from Emacs or printing an image from GIMP, the print job is added to the print spool queue. The print spool queue is a list of print jobs that have been sent to the printer and information about each print request, such as the status of the request, the job number, and more.
During the printing process, messages informing about the process appear in the notification area.
![GNOME Print Status](../../_images/gnome-print-queue.png)
To cancel, hold, release, reprint or authenticate a print job, select the job in the GNOME Print Status and on the Job menu, click the respective command.
To view the list of print jobs in the print spool from a shell prompt, type the command lpstat -o. The last few lines look similar to the following:
$ lpstat -o
Charlie-60 twaugh 1024 Tue 08 Feb 2011 16:42:11 GMT
Aaron-61 twaugh 1024 Tue 08 Feb 2011 16:42:44 GMT
Ben-62 root 1024 Tue 08 Feb 2011 16:45:42 GMT
If you want to cancel a print job, find the job number of the request with the command lpstat -o and then use the command cancel job number. For example, cancel 60 would cancel the print job in Example of lpstat -o output. You cannot cancel print jobs that were started by other users with the cancel command. However, you can enforce deletion of such job by issuing the cancel -U root job_number command. To prevent such canceling, change the printer operation policy to Authenticated
to force root
authentication.
You can also print a file directly from a shell prompt. For example, the command lp sample.txt prints the text file sample.txt
. The print filter determines what type of file it is and converts it into a format the printer can understand.
Additional Resources
To learn more about printing on Fedora, see the following resources.
Installed Documentation
- man lp
-
The manual page for the lpr command that allows you to print files from the command line.
- man cancel
-
The manual page for the command-line utility to remove print jobs from the print queue.
- man mpage
-
The manual page for the command-line utility to print multiple pages on one sheet of paper.
- man cupsd
-
The manual page for the CUPS printer daemon.
- man cupsd.conf
-
The manual page for the CUPS printer daemon configuration file.
- man classes.conf
-
The manual page for the class configuration file for CUPS.
- man lpstat
-
The manual page for the lpstat command, which displays status information about classes, jobs, and printers.
Useful Websites
- https://wiki.linuxfoundation.org/openprinting/start
-
Open Printing contains a large amount of information about printing in Linux.
- https://www.cups.org/
-
Documentation, FAQs, and newsgroups about CUPS.
Want to help? Learn how to contribute to Fedora Docs ›